NEWTON MAKES

View Original

Perfect Miter Joints

Step by step guide on how I made miter joints for wood boxes.  In the video above, I outline every step necessary for getting perfect miter joints for your next project.  These steps come from making hundreds of wooden boxes and trying difficult techniques to get the perfect miter joint.  After a lot of trial and error, I settled in on this process to setting up my table saw and get the miter joints that I want.  I’ve used this same process to cutting miter joints for picture frames too.  Instead of setting the table blade at 45 degrees, I set the miter gauge at 45 degrees.  Otherwise, I perform the same steps to get the crisp miters.  If you want to up your miter game check out my other videos on making some crazy, complex miter joints!

Here’s a list of tools I used to make this project. As an Amazon Associate I earn from qualifying purchases.

•• Tools & Materials ••

My Amazon Store: https://www.amazon.com/shop/newtonmakes

Jet Table Saw: https://amzn.to/2RwQTJa

Forrest Woodworker II Saw Blade: https://amzn.to/3kezMHf

Kreg miter gauge: https://amzn.to/3bwQ7nS

Starrett 6” combination square: https://amzn.to/3aPMN6n

iGaging Machinist Square: https://amzn.to/2V5ksCg

Random Orbit Sander https://amzn.to/2RxjkXo

120 grit sandpaper: https://amzn.to/2QW835c

180 grit sandpaper: https://amzn.to/39y5kVM

Osmo Top Oil: https://amzn.to/2xQG2SW

Finishing Applicator Pad: https://amzn.to/38sAiOF

Titebond III Ultimate Wood Glue: https://amzn.to/2tU6B8d